BOPP Carton Sealing Tape
Packing Tape for Hand and Machine Use
Seal corrugated shipping cartons with water-based acrylic packing tape. Compare hand and machine rolls to find the width, length and core size that fit your packing line.
Request a SampleBOPP Packing Tape for Corrugated Cartons
BOPP carton sealing tape pairs a biaxially oriented polypropylene film with a pressure-sensitive acrylic adhesive. Use a clear roll where carton markings need to stay visible, or a tan roll for a closure that blends with kraft board.
For a manual packing station, start with the tape width and core opening of the dispenser. For an automatic case sealer, also check the largest roll diameter the tape head can accept.
Compare hand and machine roll sizes
Key Features
BOPP Film Backing
The polypropylene film carries the adhesive across the carton seam and takes tension as the tape unwinds.
Acrylic Adhesive
The water-based adhesive bonds under pressure as the dispenser roller presses the tape against the carton.
Hand & Machine Rolls
Short rolls fit manual dispensers. Long rolls keep automatic lines running longer between roll changes.
Clear or Tan Finish
Clear tape leaves carton graphics visible. Tan tape gives plain kraft cartons a matching finish.
Typical BOPP Tape Specifications
Use this 50 μm clear grade as a starting point for sample evaluation. The performance figures are published by Fujian Youyi, a Chinese adhesive tape manufacturer.
For a purchase specification, agree on the tape grade, test method and acceptance limits with the supplier. The GB/T methods below are suggested for sample testing. View sources and standards
| Property | Supplier reference | Suggested test method |
|---|---|---|
| Backing & adhesive | BOPP / water-based acrylic | Material declaration |
| Paper core inside diameter | 76 mm (3 in nominal) | Measure the core opening |
| Total thickness | 50 μm | GB/T 7125-2014 |
| Initial tack | Steel ball No. 13 or larger | GB/T 4852-2002 |
| Peel strength | ≥ 5 N/25 mm | GB/T 2792-2014 |
| Holding power | ≥ 24 h | GB/T 4851-2014 |
| Tensile strength | ≥ 75 N/25 mm | GB/T 30776-2014 |
| Elongation at break | 100–180% | GB/T 30776-2014 |
Which roll fits your packing line?
Include the dispenser or sealer model and the dimensions on your current roll label.
Choose a Roll Format
Compare sizes and case quantities from Chinese tape suppliers.
Handheld Dispensers
Check the width and core opening against your dispenser.
| Width × length | Pack reference | Inquiry |
|---|---|---|
| 48 mm × 50 m | Confirm pack | Select 48 mm × 50 m |
| 48 mm × 66 m | Confirm pack | Select 48 mm × 66 m |
| 48 mm × 100 m | 36 rolls / case | Select 48 mm × 100 m |
Case quantities vary by supplier and roll length. The 36-roll reference applies to the 100 m roll.

Automatic Case Sealers
Match tape width, core and maximum roll diameter to the tape head.
| Width × length | Pack reference | Inquiry |
|---|---|---|
| 48 mm × 1,000 yd | 6 rolls / case | Select 48 mm × 1,000 yd |
| 72 mm × 1,000 m | Confirm pack | Select 72 mm × 1,000 m |
The 72 mm × 1,000 m reference roll has an outside diameter of 255–300 mm. Confirm the diameter of the selected grade.

Applications

Manual Carton Sealing
Use hand rolls at pick-and-pack benches where operators seal mixed carton sizes.

Automatic Packing Lines
Use machine rolls for repeated top or bottom sealing. Match the roll to the tape head.

Branded Shipping Cartons
Specify the print repeat and ink colours when the seal carries a logo or handling message.

Print & packaging
Specify the finish
Include your preferred colour and packing arrangement when requesting a sample.
- Clear or tan
- Choose a transparent seal or a brown finish for kraft cartons.
- Printed tape
- Specify the base colour, ink colours, artwork size and repeat length.
- Export carton
- Specify rolls per pack and per carton. Request carton dimensions and gross weight for freight planning.
Selection guide
Common questions
Will the roll fit my case sealer?
Check tape width, core inside diameter and the maximum outside diameter accepted by the machine. A photo of the roll label and the sealer model will help identify a match.
How should I test recycled cartons or cold storage?
Apply a sample to the actual carton at your packing temperature. Check the seal after the expected storage and transport cycle. Include both application and storage temperatures in your inquiry.
What should I provide for a printed sample?
Include a logo or artwork file, the number of ink colours, base colour, tape width and repeat length. Ask for a proof, sample terms, minimum order and lead time for the selected design.
Supplier references & sampling standards
Performance values and roll dimensions refer to the individual supplier examples. The GB/T methods are options for a new sample evaluation. Product imagery is illustrative.
Request a Quote
Tell us the roll size, quantity and finish you need. For machine rolls, include the sealer model or current roll diameter.
